Iron-on patch, Rocket Pug, 6 x 5 cm

Spice up your clothes with these adorable iron-on patches!

Ideal for shirts, trousers, jackets, hats, bags, backpacks, shoes, scarves, baby outfits, dog clothes and even school supplies such as pencil cases can be made unique. Transform your wardrobe and accessories into absolute eye-catchers with originally hand-painted motifs from the artist's studio.

Simply iron it on and enjoy it forever!

INSTRUCTIONS for applying the iron-on transfers to fabric

1. You will need an iron and an ironing board.
2. Please check that your fabric is heat-resistant, clean, smooth and ironed!
3. Position your textile on the ironing board and then place the iron-on image with the adhesive side facing down on the desired part of the textile.
4. It is recommended to set the dry iron without steam at a temperature of 130ºC/270ºF to 150ºC/300ºF (cotton setting).
5. Iron the label on with firm pressure for a maximum of 8 to 12 seconds. Make sure to keep the iron steady!
6. Allow the label and fabric to cool completely. This should ideally take one to two minutes. Cooling will ensure that the label adheres securely to the fabric.
7. Once the label has cooled, carefully peel off the backing film. If part of the design is still stuck to the film, put the film back on and repeat steps 5 and 6.
8. It is recommended to wait at least 24 hours before washing or moistening the iron-on transfer. This ensures that the adhesive has completely hardened on the textile.

TIP! This way your iron-on transfers will stay beautiful for many years.

• Turn inside out and wash on a gentle cycle at a temperature below 40 degrees.
• Avoid using a tumble dryer and air dry the textiles instead.
• Do not iron directly on the print to avoid damage.
• The labels should be protected from direct sunlight and extreme temperatures.
• Be aware of certain areas of the fabric that are subject to heavy wear and tear in everyday life, as these can be damaged more quickly.